1 Inch x 10 Cold Shrink Tape Black

• Self-amalgamating ethylene propylene rubber (EPR) “welds” itself chemically and mechanically to form a watertight skin
• Resists abrasion, impact, sunlight, ozone and most chemicals
• Requires no heat or flame
• Temperature Range: -40°C to 100°C and 130°C intermittently
• Dielectric Strength: 36 KV/mm SCOTCH® FIRE RETARDANT ELECTRIC ARC PROOFING TAPE 77 823.42006
• 3” x 20’ roll
• Designed to protect all types of electric cables where exposed to potential failures of other high voltage cables or exposed to other high energy cables
• Extremely conformable, easily wraps irregular shapes
• Provides fault arc protection to adjacent wrapped cables and accessories
• Self-extinguishing, will not propagate flame • Non-corrosive to metallic cable sheaths and compatible with synthetic cable jackets (i.e. semiconducting URD type, polyethylene, PVC, etc.) • Resistant to water, salt water, acids, sewage, and ultraviolet light
• Thickness: 30 mils (.030”)
• Color: Black

Uses:
Automotive: Insulate battery terminal ends and starter ends to prevent shorting and corrosion. Industrial: Insulate power cables up to 69KV, waterproof telecommunications cable above or below ground, wrap metal pipework for corrosion protection.


Directions:
1. Strip back film and stretch tape to reduce its width by between 1/3 or 1/2. 2. Keep tape under tension and wrap, overlapping each wrap by 50% until desired buildup of insulation is achieved. 3. Finish wrapping by holding the tape under thumb and snap by stretching

• Color: Black
• Dielectric Strength: 36 kV/mm
• Length: 10 ft
• Material: Ethylene Propylene Rubber